While in theory, once upon a time, dv_type was arch specific, that's
never been the case in FreeBSD (and certaintly isn't in the surviving
drivers). Remove that notation.
Sponsored by: Netflix
Reviewed by: tsoome
Differential Revision: https://reviews.freebsd.org/D35911
Rather than hard coding 8 for the device name length, create a #define for it.
Sponsored by: Netflix
Reviewed by: tsoome
Differential Revision: https://reviews.freebsd.org/D35910
Fix a typo by reworking the comment for blake3_impl_hack.c and amplify
the nature of the hack and its temporary reason for existing.
Sponsored by: Netflix
Reviewed by: delphij
Differential Revision: https://reviews.freebsd.org/D35895
Now that the minor issues preventing zfs.c from using CFLAGS_EARLY have
been fixed, use that mechanism like everything else that needs the
OpenZFS spl headers. This simplifies things somewhat. Update comments to
document why zfs.c is still special, though in different ways.
Note: We also use the fact that NEED_SOLARIS_BOOLEAN is only defined in
an environment where the solaris compat boolean stuff will be defined
prior to this point (eg, when we're building zfs.c in libsa), but not in
other environments (like when we're building mkimage and stand-alone
boot loaders that don't use libsa). These latter uses should be changed
to use the same ZFS compile env, but aren't as part of this commit.
This has to be done in the same change as the ZFS_EARLY change to not
break zfs.c building for one commit affecting bisectabiltiy.
Sponsored by: Netflix
Reviewed by: tsoome, delphij
Differential Revision: https://reviews.freebsd.org/D35894
Constrain CFLAGS for ZFS: don't add anything globally. Add the includes
to only the files that need them. Add -DHAS_ZSTD_ZFS to zfs.c (which
includes zfsimpl.c which includes zfssubr.c both of which need this
defined). Also add it to efi/boot1/Makefile since zfs_module.c also
includes zfsimple.c.
Sponsored by: Netflix
Reviewed by: tsoome
Differential Revision: https://reviews.freebsd.org/D35887
Various GELI sources need bootstrap.h and disk.h. In theory they
shouldn't need anything outside of libsa, but disk.h and bootstrap.h are
currently required.
This fixes the build with MK_LOADER_ZFS=no.
Obtained from: CheriBSD
Fixes: eaf7aabddc stand: geli CFLAGS tightening
Sponsored by: DARPA
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D35861
In theory they shouldn't need anything outside of libsa, but disk.h and
bootstrap.h are currently required. Future work wil address this issue.
This fixes the build with MK_LOADER_ZFS=no. ZFS's Makefile.inc adds
these flags globally to CFLAGS when it should not. This masked the
problem because the tools/boot/universe.sh didn't build MK_LOADER_ZFS=no
as part of its regressions. Future work will also fix this.
Obtained from: CheriBSD
Fixes: 84bf2bbbec stand: constrain zlib/gzip CFLAGS better
Sponsored by: DARPA
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D35860
Add comments describing the weird nesting things we have to do to live
inside the ZFS world. Also fix a stale comment by moving nvlist.c to an
early user.
Sponsored by: Netflix
Add the necessary glue to get blake3 building for the boot loaded as
well as connected to the ZFS system so it is useful.
On some platforms, we create references to blake3_sse2_impl and
blake3_sse41_impl ops structs to utilize SIMD. These aren't present on
x86 (since we dind't ask for them), but are on aarch64 with no
implementation. Since we don't want SIMD in the boot loader, have these
all return 'unsupported' always. This should be fixed upstream to allow
more flexibility in this selection, but for now we use this hack to not
modify the sys/contrib/openzfs with difficult to maintain hacks while
an upstreamable solution is found.
tsoome@ did the implementation bits in sys/cddl/boot, and I did the
Makefile work and the aweful blake3_impl_hack.c.
Co-author: tsoome@freebsd.org
Sponsored by: Netflix
Reviewed by: kevans (earlier version)
Differential Revision: https://reviews.freebsd.org/D35750
We no longer need to use this to get zfs_zstd.c compiling, so delete it.
Sponsored by: Netflix
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D35750
Now that we have the ability to work around all the issues that
zstd_stub.c worked around, compile zfs_std.c directly.
Sponsored by: Netflix
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D35750
sys/blake3.h is not safe to include in a standalone environment. It
assumes, unwisely, that there's only kernel or userland. The userland
choice is bad due to imperfections in how we handle stdlib.h in this
environment (we wind up including the host's stdlib.h, it expects a
standard FreeBSD setup which the gymnastics we've done to create a
OpenSolaris/Illumos-like environment interfere with). Thankfully, in
this case we can just pretend to be the kernel for a little bit by
defining _KERNEL and the undefing it after we exit.
Sponsored by: Netflix
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D35750
There's a number of issues with including zfs_context.h from a
standalone environment. First, sys/uio_imp.h isn't at all safe for this
environment, so define its guard #defines so that its contents are
skipped. Next, there's a problem including string.h to get the mem*
routines, so just define them here. ZFS_MODULE_PARAM_ARGS isn't defined
properly. I had wanted to define it when I was upstreaming changes to
include/os/freebsd/spl/sys/zfs_context.h, but they ran into resistance
so I'm defining that here now (it is also defined in zstd_shim.c, but
that will disappear once the issues it works around are
cleared). Finally, sys/sysmacros.h has to be included now before
sys/atomic.h, but upstream includes it after so include it here so that
the guards make the out-of-order includes in upstream irrelevant.
Sponsored by: Netflix
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D35750
OpenZFS is based on having a number of layers of include files that
define things and include the next layer. Insert a later at the start
for files in libsa/zfs/spl so we can override issues with upstream
OpenZFS while we work to get the issues corrected upstream.
Sponsored by: Netflix
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D35750
Add a note that veriexec / bearssl builds will pollute the CFLAGS in a
way that's somewhat hard to fix, so I'm just noting it for now.
Sponsored by: Netflix
Only add -DWEAK_REFS to sha256.c and sha512.c instead of
everything. Remove redundant include that's not needed.
Minor formatting tweak.
Sponsored by: Netflix
CFLAGS+= here affects *ALL* libsa files being built. However, this is
only needed for zfs.c, so define it only for this. Also, use the defines
from defs.mk. Move all the zfs.c include hacks together. Also, move the
-Wformat -Wall warnings that were added to CFLAGS+= to the individual
files instead for the same reason.
Sponsored by: Netflix
ZFSSRC is the top level directory where the ZFS sources come from. Don't
reuse it for a list of ZFS sources. Instead, use ZFS_SRC
Sponsored by: Netflix
geli_probe_and_attach() does pick geli_devsw structure for
encrypted disks, the implementation depends on device
name "disk" when device type is DEVT_DISK, but geli_devsw is
setting name field "gelidisk".
PR: 264282
Submitted by: yamagi@yamagi.org
Reported by: yamagi@yamagi.org
MFC after: 2 weeks
Notable upstream pull request merges:
#12321 Fix inflated quiesce time caused by lwb_tx during zil_commit()
#13244 zstd early abort
#13360 Verify BPs as part of spa_load_verify_cb()
#13452 More speculative prefetcher improvements
#13466 Expose zpool guids through kstats
#13476 Refactor Log Size Limit
#13484 FreeBSD: libspl: Add locking around statfs globals
#13498 Cancel in-progress rebuilds when we finish removal
#13499 zed: Take no action on scrub/resilver checksum errors
#13513 Remove wrong assertion in log spacemap
Obtained from: OpenZFS
OpenZFS commit: b9d98453f9
head_errlog is new format for errlog, but we do not really
use errlog, so we can just mark it supported, to enable reading
from pool.
MFC after: 1 week
Move declarations into a new nvlist.h rather than putting everything in
libzfs.h. This makes this nvlist code easier to reuse elsewhere. In
particular, the nvlist implementation in sys/contrib/libnv does not
provide XDR encoding, but this is needed when reading from or writing to
ZFS pools.
Also:
- Remove references to boolean_t. It has to be a 32-bit int here, so
just reference the underlying type.
- Add includes needed when compiling the nvlist code outside of stand/.
No functional change intended.
Reviewed by: tsoome
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35255
When adding an entry to an nvlist, the data buffer might need to be
resized. When this happens, the XDR encoder's notion of the buffer size
also needs to be updated, otherwise the operation may erroneously fail.
Reviewed by: tsoome, imp
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35254
Turns out there is a libsa.3. It's a bit out of date, but we reference
it in a number of places so we should install it. We need to do the DO32
dance because this Makefile is included twice and we don't want it
installing twice.
Sponsored by: Netflix
This mirrors dmu_read_impl(), zeroing out the tail end of the buffer and
clipping the read to what's contained by the block that exists.
This fixes an issue that arose during the 13.1 release process; in
13.1-RC1 and later, setting up GELI+ZFS will result in a failure to
boot. The culprit is this, which causes us to fail to load geom_eli.ko
as there's a residual portion after the single datablk that should be
zeroed out.
PR: 263407
Reviewed by: tsoome
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D35019
Notable upstream pull request merges:
#9078: log xattr=sa create/remove/update to ZIL
#11919: Cross-platform xattr user namespace compatibility
#13014: Report dnodes with faulty bonuslen
#13016: FreeBSD: Fix zvol_cdev_open locking
#13019: spl: Don't check FreeBSD rwlocks for double initialization
#13027: Fix clearing set-uid and set-gid bits on a file when
replying a write
#13031: Add enumerated vdev names to 'zpool iostat -v' and
'zpool list -v'
#13074: Enable encrypted raw sending to pools with greater ashift
#13076: Receive checks should allow unencrypted child datasets
#13098: Avoid dirtying the final TXGs when exporting a pool
#13172: Fix ENOSPC when unlinking multiple files from full pool
Obtained from: OpenZFS
OpenZFS commit: a86e089415
- Use AES_XTS_IV_LEN instead of the key length as the IV length.
- Use G_ELI_IVKEYLEN as the size of the zeroed iv[] array in
g_eli_crypto_cipher() to match geli_io().
PR: 261172
Reported by: Malcolm Matalka <mmatalka@gmail.com>, mikael
Reviewed by: markj
Sponsored by: FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33884
This helps mesuring what's happening when we load the kernel/modules/mfsroot.
This also adds TSENTER2 which uses the third argument of TSRAW, same
as in the kernel.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33699
Shortlinks occupy the space of both di_db and di_ib when used. However,
everywhere that wants to read or write a shortlink takes a pointer do
di_db and promptly runs off the end of it into di_ib. This is fine on
most architectures, if a little dodgy. However, on CHERI, the compiler
can optionally restrict the bounds on pointers to subobjects to just
that subobject, in order to mitigate intra-object buffer overflows, and
this is enabled in CheriBSD's pure-capability kernels.
Instead, clean this up by inserting a union such that a new di_shortlink
can be added with the right size and element type, avoiding the need to
cast and allowing the use of the DIP macro to access the field. This
also mirrors how the ext2fs code implements extents support, with the
exact same structure other than having a uint32_t i_data[] instead of a
char di_shortlink[].
Reviewed by: mckusick, jhb
Differential Revision: https://reviews.freebsd.org/D33650
tftp_open reads the first block so copy it in the cached data.
If we have more than one block (i.e. we called tftp_read before
tftp_preload) simply just reset the transfer.
Reported by: mmel
Reviewed by: mmel, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33697
The preload method will transfer the whole file in a buffer and cache it
so read/lseek operations are faster.
Reviewed by: imp, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33410
When we load an ELF file (kernel or module) we do seek(2) a lot to
parse/load the different sections of the ELF file.
Protocol like TFTP suffers a lot from this as there is no resume or
a way to start the tranfer from a specified offset in the file.
fs_preload is added to help those protocol.
Call preload just after opening the ELF file that we need to load so
the underlying method can cache the hole file and then read/lseek operations
are faster.
Reviewed by: imp
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33409
getsecs is very costly, reuse the values we got before.
Fetching a ~30MB kernel with the tftp command use to take ~26 seconds
and now it's ~18 seconds.
Reviewed by: imp, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33408
Warner Losh