Merge pull request #14 from Emsalettin1/turkishsupport

Added Turkish support

install_station/create_cfg.py

@@ -156,5 +156,11 @@ class Configuration:
                 f.write("runCommand=pw userdel -n ghostbsd -r\n")
                 f.write("runCommand=sed -i '' 's/ghostbsd/root/g' /etc/gettytab\n")
                 f.write("runCommand=sed -i '' 's/ghostbsd/root/g' /etc/ttys\n")
+                f.write("runCommand=echo '# WARNING: Do NOT set initial_setup_enable=YES manually!' >> /etc/rc.conf\n")
+                f.write("runCommand=echo '# This service is ONLY for first boot after installation.' >> /etc/rc.conf\n")
+                f.write("runCommand=echo '# It will automatically disable itself after running.' >> /etc/rc.conf\n")
+                f.write("runCommand=sysrc initial_setup_enable=YES\n")
+                f.write("runCommand=sed -i '' '/^autologin-user=/d' /usr/local/etc/lightdm/lightdm.conf\n")
+                f.write("runCommand=sed -i '' '/^autologin-session=/d' /usr/local/etc/lightdm/lightdm.conf\n")
         except IOError as e:
             raise IOError(f"Failed to write configuration file: {e}") from e

install_station/install.py

@@ -112,6 +112,7 @@ class InstallWindow:
         label2.set_line_wrap(True)
         # label2.set_max_width_chars(10)
         label2.set_alignment(0.0, 0.2)
+        label2.show()
         hbox2 = Gtk.Box(orientation=Gtk.Orientation.HORIZONTAL, homogeneous=False, spacing=0, name="TransBox")
         hbox2.show()
         hbox.pack_start(hbox2, True, True, 0)

install_station/interface_controller.py

@@ -208,10 +208,10 @@ class Interface:
                         InstallationData.keyboard_variant,
                         InstallationData.keyboard_model_code
                     )
-                with open('/usr/home/ghostbsd/.xinitrc', 'w') as xinitrc:
+                with open('/home/ghostbsd/.xinitrc', 'w') as xinitrc:
                     xinitrc.writelines('gsettings set org.mate.SettingsDaemon.plugins.housekeeping active true &\n')
-                xinitrc.writelines('gsettings set org.mate.screensaver lock-enabled false &\n')
+                    xinitrc.writelines('gsettings set org.mate.screensaver lock-enabled false &\n')
-                xinitrc.writelines('exec ck-launch-session mate-session\n')
+                    xinitrc.writelines('exec ck-launch-session mate-session\n')
                 Gtk.main_quit()
         elif page == 4:
             Button.show_back()
@@ -298,4 +298,4 @@ class Interface:
         current_page_widget = cls.page.get_nth_page(cls.page.get_current_page())
         title_text = cls.page.get_tab_label_text(current_page_widget)
         Window.set_title(title_text)
-        # Button.next_button.set_sensitive(True)
+        Button.next_button.set_sensitive(True)

install_station/partition.py

@@ -7,6 +7,7 @@ import re
 from time import sleep
 from subprocess import Popen, PIPE, STDOUT, call
 from install_station.data import query, zfs_datasets, InstallationData
+from install_station.system_calls import get_ram_size_mb
 
 # Define required file paths
 
@@ -779,7 +780,7 @@ class AutoFreeSpace:
         InstallationData.slice = main_slice.replace(drive, "")
 
         root_size = int(main_size)
-        swap_size = 2048
+        swap_size = get_ram_size_mb()
         root_size -= swap_size
 
         part_list = disk_db[drive]['partitions'][main_slice]['partition-list']
@@ -861,7 +862,7 @@ class AutoFreeSpace:
         InstallationData.disk = drive
         InstallationData.scheme = 'partscheme=GPT'
         root_size = int(main_size)
-        swap_size = 2048
+        swap_size = get_ram_size_mb()
         root_size -= int(swap_size)
         if self.bios_type == "UEFI" and efi_exist is False:
             boot_size = 256

install_station/system_calls.py

@@ -258,6 +258,21 @@ def timezone_dictionary() -> dict[str, list[str]]:
     return dictionary
 
 
+def get_ram_size_mb() -> int:
+    """Query the system RAM size in megabytes using sysctl.
+
+    Returns:
+        System RAM size in MB
+    """
+    output = Popen(
+        'sysctl -n hw.realmem',
+        shell=True,
+        stdout=PIPE,
+        universal_newlines=True
+    ).stdout.read().strip()
+    return int(output) // 1048576
+
+
 def zfs_disk_query() -> list[str]:
     """Query available disks for ZFS installation.
     

install_station/use_zfs.py

@@ -3,6 +3,7 @@ from install_station.common import password_strength
 from install_station.data import InstallationData, zfs_datasets, be_name, logo, get_text
 from install_station.partition import bios_or_uefi
 from install_station.system_calls import (
+    get_ram_size_mb,
     zfs_disk_query,
     zfs_disk_size_query,
 )
@@ -38,13 +39,13 @@ class ZFS:
     zfs_disk_list = []
     pool_type = 'stripe'
     scheme = 'GPT'
-    zpool = False
     disk_encrypt = False
-    mirror = 'single disk'
+    mirror = 'stripe'
     vbox1 = None
-    
+
     # UI elements as class variables
     pool = None
+    swap_entry = None
     password = None
     repassword = None
     mirrorTips = None
@@ -69,28 +70,19 @@ class ZFS:
         # Validate required fields are populated
         if not cls.zfs_disk_list:
             raise ValueError("No disks selected for ZFS configuration")
-            
+
-        if cls.zpool and not cls.pool.get_text().strip():
-            raise ValueError("Pool name cannot be empty when zpool is enabled")
-            
         if cls.disk_encrypt and not cls.password.get_text().strip():
             raise ValueError("Password cannot be empty when disk encryption is enabled")
-            
+
         size = int(cls.zfs_disk_list[0].partition('-')[2].rstrip()) - 512
-        swap = 0
+        swap_size = cls.swap_entry.get_value_as_int()
-        zfs_num = size - swap
+        zfs_num = size - swap_size
-        if cls.disk_encrypt is True:
+        dgeli = '.eli' if cls.disk_encrypt else ''
-            dgeli = '.eli'
-        else:
-            dgeli = ''
 
         # Store configuration data in InstallationData instead of writing to file
         InstallationData.zfs_config_data = []
-        
+
-        if cls.zpool is True:
+        InstallationData.zfs_config_data.append(f"zpoolName={cls.pool.get_text()}\n")
-            InstallationData.zfs_config_data.append(f"zpoolName={cls.pool.get_text()}\n")
-        else:
-            InstallationData.zfs_config_data.append("#zpoolName=None\n")
         InstallationData.zfs_config_data.append(f"beName={be_name}\n")
         InstallationData.zfs_config_data.append('ashift=12\n\n')
         disk = cls.zfs_disk_list[0].partition('-')[0].rstrip()
@@ -98,18 +90,13 @@ class ZFS:
         InstallationData.zfs_config_data.append('partition=ALL\n')
         InstallationData.zfs_config_data.append(f'partscheme={cls.scheme}\n')
         InstallationData.zfs_config_data.append('commitDiskPart\n\n')
-        if cls.pool_type == 'none':
+        if len(cls.zfs_disk_list) <= 1:
             pool_disk = '\n'
         else:
             zfs_disk = cls.zfs_disk_list
-            disk_len = len(zfs_disk) - 1
-            num = 1
             mirror_dsk = ''
-            while disk_len != 0:
+            for i in range(1, len(zfs_disk)):
-                mirror_dsk += ' ' + zfs_disk[num].partition('-')[0].rstrip()
+                mirror_dsk += ' ' + zfs_disk[i].partition('-')[0].rstrip()
-                print(mirror_dsk)
-                num += 1
-                disk_len -= 1
             pool_disk = f' ({cls.pool_type}:{mirror_dsk})\n'
         if bios_or_uefi() == "UEFI":
             zfs_num = zfs_num - 100
@@ -118,19 +105,51 @@ class ZFS:
         # adding zero to use remaining space
         zfs_part = f'disk0-part=ZFS{dgeli} {zfs_num} {zfs_datasets}{pool_disk}'
         InstallationData.zfs_config_data.append(zfs_part)
-        if swap != 0:
+        # encpass must be on the line immediately after the .eli partition
-            InstallationData.zfs_config_data.append('disk0-part=swap 0 none\n')
+        if cls.disk_encrypt:
-        if cls.disk_encrypt is True:
             InstallationData.zfs_config_data.append(f'encpass={cls.password.get_text()}\n')
         else:
             InstallationData.zfs_config_data.append('#encpass=None\n')
+        if swap_size != 0:
+            if cls.disk_encrypt:
+                InstallationData.zfs_config_data.append('disk0-part=SWAP.eli 0 none\n')
+            else:
+                InstallationData.zfs_config_data.append('disk0-part=SWAP 0 none\n')
         InstallationData.zfs_config_data.append('commitDiskLabel\n')
 
+    @classmethod
+    def _is_ready(cls):
+        """
+        Check if all conditions are met to proceed to the next page.
+
+        Returns:
+            bool: True if disk count, swap entry, and encryption requirements are all satisfied.
+        """
+        count = len(cls.zfs_disk_list)
+        if cls.mirror == "stripe":
+            disks_ok = count >= 1
+        elif cls.mirror == "mirror":
+            disks_ok = count >= 2
+        elif cls.mirror == "raidz1":
+            disks_ok = count == 3
+        elif cls.mirror == "raidz2":
+            disks_ok = count == 4
+        elif cls.mirror == "raidz3":
+            disks_ok = count == 5
+        else:
+            disks_ok = False
+        if cls.disk_encrypt:
+            encrypt_ok = (cls.password.get_text() == cls.repassword.get_text()
+                          and len(cls.password.get_text()) > 0)
+        else:
+            encrypt_ok = True
+        return disks_ok and encrypt_ok
+
     @classmethod
     def scheme_selection(cls, combobox):
         """
         Handle partition scheme selection from combo box.
-        
+
         Args:
             combobox: ComboBox widget containing scheme options (GPT/MBR)
         """
@@ -143,80 +162,48 @@ class ZFS:
     def mirror_selection(cls, combobox):
         """
         Handle pool type selection and update UI accordingly.
-        
+
         Sets the pool type (stripe, mirror, RAIDZ1/2/3) and updates the tip text
         and next button sensitivity based on the number of selected disks.
-        
+
         Args:
             combobox: ComboBox widget containing pool type options
         """
         model = combobox.get_model()
         index = combobox.get_active()
-        data = model[index][0]  # Get the internal value (English)
+        data = model[index][0]
         cls.mirror = data
-        if cls.mirror == "1+ disks Stripe":
+        smallest_msg = get_text("(select the smallest disk first)")
+        if cls.mirror == "stripe":
             cls.pool_type = 'stripe'
             cls.mirrorTips.set_text(
-                get_text("Please select 1 or more drive for stripe (select the smallest disk first)"))
+                get_text("Select 1 or more drives, no redundancy") + " " + smallest_msg)
-            if len(cls.zfs_disk_list) >= 1:
+        elif cls.mirror == "mirror":
-                Button.next_button.set_sensitive(True)
-            else:
-                Button.next_button.set_sensitive(False)
-        elif cls.mirror == "2+ disks Mirror":
             cls.pool_type = 'mirror'
-            mir_msg1 = get_text("Please select 2 drive for mirroring (select the smallest disk first)")
+            cls.mirrorTips.set_text(
-            cls.mirrorTips.set_text(mir_msg1)
+                get_text("Select 2 or more drives for mirroring") + " " + smallest_msg)
-            if len(cls.zfs_disk_list) >= 2:
+        elif cls.mirror == "raidz1":
-                Button.next_button.set_sensitive(True)
-            else:
-                Button.next_button.set_sensitive(False)
-        elif cls.mirror == "3 disks RAIDZ1":
             cls.pool_type = 'raidz1'
-            cls.mirrorTips.set_text(get_text("Please select 3 drive for RAIDZ1 (select the smallest disk first)"))
+            cls.mirrorTips.set_text(
-            if len(cls.zfs_disk_list) == 3:
+                get_text("Select 3 drives for RAIDZ1") + " " + smallest_msg)
-                Button.next_button.set_sensitive(True)
+        elif cls.mirror == "raidz2":
-            else:
-                Button.next_button.set_sensitive(False)
-        elif cls.mirror == "4 disks RAIDZ2":
             cls.pool_type = 'raidz2'
-            cls.mirrorTips.set_text(get_text("Please select 4 drive for RAIDZ2 (select the smallest disk first)"))
+            cls.mirrorTips.set_text(
-            if len(cls.zfs_disk_list) == 4:
+                get_text("Select 4 drives for RAIDZ2") + " " + smallest_msg)
-                Button.next_button.set_sensitive(True)
+        elif cls.mirror == "raidz3":
-            else:
-                Button.next_button.set_sensitive(False)
-        elif cls.mirror == "5 disks RAIDZ3":
             cls.pool_type = 'raidz3'
-            cls.mirrorTips.set_text(get_text("Please select 5 drive for RAIDZ3 (select the smallest disk first)"))
+            cls.mirrorTips.set_text(
-            if len(cls.zfs_disk_list) == 5:
+                get_text("Select 5 drives for RAIDZ3") + " " + smallest_msg)
-                Button.next_button.set_sensitive(True)
+        Button.next_button.set_sensitive(cls._is_ready())
-            else:
-                Button.next_button.set_sensitive(False)
-
-    @classmethod
-    def on_check_poll(cls, widget):
-        """
-        Handle custom pool name checkbox toggle.
-        
-        Enables or disables the pool name entry field based on checkbox state.
-        
-        Args:
-            widget: CheckButton widget for pool name enable/disable
-        """
-        if widget.get_active():
-            cls.pool.set_sensitive(True)
-            cls.zpool = True
-        else:
-            cls.pool.set_sensitive(False)
-            cls.zpool = False
 
     @classmethod
     def on_check_encrypt(cls, widget):
         """
         Handle disk encryption checkbox toggle.
-        
+
         Enables or disables password fields and updates next button sensitivity
         based on encryption state and current disk selection.
-        
+
         Args:
             widget: CheckButton widget for disk encryption enable/disable
         """
@@ -229,31 +216,21 @@ class ZFS:
             cls.password.set_sensitive(False)
             cls.repassword.set_sensitive(False)
             cls.disk_encrypt = False
-            if cls.mirror == "1+ disks Stripe":
+            Button.next_button.set_sensitive(cls._is_ready())
-                if len(cls.zfs_disk_list) >= 1:
+
-                    Button.next_button.set_sensitive(True)
+    @classmethod
-                else:
+    def on_password_changed(cls, _widget):
-                    Button.next_button.set_sensitive(False)
+        """
-            elif cls.mirror == "2+ disks Mirror":
+        Handle password entry changes and update strength display.
-                if len(cls.zfs_disk_list) >= 2:
+
-                    Button.next_button.set_sensitive(True)
+        Wraps the common password_strength function to extract the text
-                else:
+        from the Entry widget and pass it with the strength label.
-                    Button.next_button.set_sensitive(False)
+
-            elif cls.mirror == "3 disks RAIDZ1":
+        Args:
-                if len(cls.zfs_disk_list) == 3:
+            _widget: Entry widget that triggered the change (unused)
-                    Button.next_button.set_sensitive(True)
+        """
-                else:
+        password_strength(cls.password.get_text(), cls.strenght_label)
-                    Button.next_button.set_sensitive(False)
+        Button.next_button.set_sensitive(cls._is_ready())
-            elif cls.mirror == "4 disks RAIDZ2":
-                if len(cls.zfs_disk_list) == 4:
-                    Button.next_button.set_sensitive(True)
-                else:
-                    Button.next_button.set_sensitive(False)
-            elif cls.mirror == "5 disks RAIDZ3":
-                if len(cls.zfs_disk_list) == 5:
-                    Button.next_button.set_sensitive(True)
-                else:
-                    Button.next_button.set_sensitive(False)
 
     @classmethod
     def initialize(cls):
@@ -271,7 +248,8 @@ class ZFS:
         """
         cls.vbox1 = Gtk.Box(orientation=Gtk.Orientation.VERTICAL, homogeneous=False, spacing=0)
         cls.vbox1.show()
-        # Chose disk
+
+        # Disk list in a scrolled window
         sw = Gtk.ScrolledWindow(hexpand=True, vexpand=True)
         sw.set_shadow_type(Gtk.ShadowType.ETCHED_IN)
         sw.set_policy(Gtk.PolicyType.AUTOMATIC, Gtk.PolicyType.AUTOMATIC)
@@ -319,37 +297,39 @@ class ZFS:
         tree_selection.set_mode(Gtk.SelectionMode.SINGLE)
         sw.add(treeview)
         sw.show()
+
         cls.mirrorTips = Gtk.Label(label=get_text('Please select one drive'))
         cls.mirrorTips.set_justify(Gtk.Justification.LEFT)
         cls.mirrorTips.set_alignment(0.01, 0.5)
-        # Mirror, raidz and stripe
-        cls.mirror = 'none'
-        mirror_label = Gtk.Label(label=get_text('<b>Pool Type</b>'))
-        mirror_label.set_use_markup(True)
-        mirror_box = Gtk.ComboBox()
-        mirror_store = Gtk.ListStore(str, str)  # value, display_text
-        mirror_store.append(["1+ disks Stripe", get_text("1+ disks Stripe")])
-        mirror_store.append(["2+ disks Mirror", get_text("2+ disks Mirror")])
-        mirror_store.append(["3 disks RAIDZ1", get_text("3 disks RAIDZ1")])
-        mirror_store.append(["4 disks RAIDZ2", get_text("4 disks RAIDZ2")])
-        mirror_store.append(["5 disks RAIDZ3", get_text("5 disks RAIDZ3")])
-        mirror_box.set_model(mirror_store)
-        renderer = Gtk.CellRendererText()
-        mirror_box.pack_start(renderer, True)
-        mirror_box.add_attribute(renderer, "text", 1)  # Display column 1 (translated text)
-        mirror_box.connect('changed', cls.mirror_selection)
-        mirror_box.set_active(0)
 
-        # Pool Name
+        # Pool Layout
-        cls.zpool = False
+        cls.mirror = 'stripe'
-        pool_name_label = Gtk.Label(label=get_text('<b>Pool Name</b>'))
+        mirror_label = Gtk.Label(label=get_text('Pool Layout'))
-        pool_name_label.set_use_markup(True)
+        mirror_label.set_use_markup(True)
+        mirror_box = Gtk.ComboBoxText()
+        mirror_box.append_text("stripe")
+        mirror_box.append_text("mirror")
+        mirror_box.append_text("raidz1")
+        mirror_box.append_text("raidz2")
+        mirror_box.append_text("raidz3")
+        mirror_box.set_active(0)
+        mirror_box.connect('changed', cls.mirror_selection)
+
+        # Pool Name (always editable)
+        pool_label = Gtk.Label(label=get_text('Pool Name'))
+        pool_label.set_use_markup(True)
         cls.pool = Gtk.Entry()
         cls.pool.set_text('zroot')
+
+        # Swap Size
+        swap_label = Gtk.Label(label=get_text('Swap Size(MB)'))
+        swap_label.set_use_markup(True)
+        ram_mb = get_ram_size_mb()
+        adj = Gtk.Adjustment(ram_mb, 0, ram_mb, 1, 100, 0)
+        cls.swap_entry = Gtk.SpinButton(adjustment=adj, numeric=True)
+        cls.swap_entry.set_editable(True)
+
         # Creating MBR or GPT drive
-        scheme_label = Gtk.Label(label='<b>Partition Scheme</b>')
-        scheme_label.set_use_markup(True)
-        # Adding a combo box to selecting MBR or GPT sheme.
         cls.scheme = 'GPT'
         shemebox = Gtk.ComboBoxText()
         shemebox.append_text("GPT")
@@ -360,52 +340,85 @@ class ZFS:
             shemebox.set_sensitive(False)
         else:
             shemebox.set_sensitive(True)
+
         # GELI Disk encryption
         cls.disk_encrypt = False
-        encrypt_check = Gtk.CheckButton(label=get_text("Encrypt Disk"))
+        encrypt_check = Gtk.CheckButton(label=get_text("Encrypt Disk (GELI)"))
         encrypt_check.connect("toggled", cls.on_check_encrypt)
         encrypt_check.set_sensitive(True)
-        # password
+
+        # Password
         cls.passwd_label = Gtk.Label(label=get_text("Password"))
         cls.password = Gtk.Entry()
         cls.password.set_sensitive(False)
         cls.password.set_visibility(False)
-        cls.password.connect("changed", password_strength)
+        cls.password.connect("changed", cls.on_password_changed)
         cls.strenght_label = Gtk.Label()
         cls.strenght_label.set_alignment(0.1, 0.5)
-        cls.vpasswd_label = Gtk.Label(label=get_text("Verify it"))
+        cls.strenght_label.set_size_request(-1, 20)
+
+        # Verify password
+        cls.vpasswd_label = Gtk.Label(label=get_text("Confirm"))
         cls.repassword = Gtk.Entry()
         cls.repassword.set_sensitive(False)
         cls.repassword.set_visibility(False)
         cls.repassword.connect("changed", cls.password_verification)
-        # set image for password matching
+
+        # Password match image
         cls.img = Gtk.Image()
-        cls.img.set_alignment(0.2, 0.5)
+        cls.img.set_size_request(20, 20)
-        # table = Gtk.Table(12, 12, True)
+
-        grid = Gtk.Grid()
+        # Two-column layout: left settings, right disk list
-        grid.set_row_spacing(10)
+        hbox_main = Gtk.Box(orientation=Gtk.Orientation.HORIZONTAL, homogeneous=False, spacing=10)
-        # grid.set_column_homogeneous(True)
+
-        # grid.set_row_homogeneous(True)
+        # Left panel: settings grid
-        # grid.attach(Title, 1, 1, 10, 1)
+        left_grid = Gtk.Grid()
-        grid.attach(mirror_label, 1, 2, 1, 1)
+        left_grid.set_row_spacing(4)
-        grid.attach(mirror_box, 2, 2, 1, 1)
+        left_grid.set_column_spacing(6)
-        grid.attach(pool_name_label, 7, 2, 2, 1)
+        left_grid.set_hexpand(False)
-        grid.attach(cls.pool, 9, 2, 2, 1)
+
-        grid.attach(cls.mirrorTips, 1, 3, 8, 1)
+        mirror_label.set_alignment(0, 0.5)
-        # grid.attach(zfs4kcheck, 9, 3, 2, 1)
+        pool_label.set_alignment(0, 0.5)
-        grid.attach(sw, 1, 4, 10, 3)
+        swap_label.set_alignment(0, 0.5)
-        # grid.attach(scheme_label, 1, 9, 1, 1)
+        cls.passwd_label.set_alignment(0, 0.5)
-        # grid.attach(shemebox, 2, 9, 1, 1)
+        cls.vpasswd_label.set_alignment(0, 0.5)
-        # grid.attach(cls.swap_encrypt_check, 9, 15, 11, 12)
+
-        # grid.attach(swap_mirror_check, 9, 15, 11, 12)
+        # Row 0-1: Pool Layout
-        # grid.attach(encrypt_check, 2, 8, 2, 1)
+        left_grid.attach(mirror_label, 0, 0, 2, 1)
-        # grid.attach(cls.passwd_label, 1, 9, 1, 1)
+        left_grid.attach(mirror_box, 0, 1, 2, 1)
-        # grid.attach(cls.password, 2, 9, 2, 1)
+        # Row 2-3: Pool Name
-        # grid.attach(cls.strenght_label, 4, 9, 2, 1)
+        left_grid.attach(pool_label, 0, 2, 2, 1)
-        # grid.attach(cls.vpasswd_label, 1, 10, 1, 1)
+        left_grid.attach(cls.pool, 0, 3, 2, 1)
-        # grid.attach(cls.repassword, 2, 10, 2, 1)
+        # Row 4-5: Swap Size
-        # grid.attach(cls.img, 4, 10, 2, 1)
+        left_grid.attach(swap_label, 0, 4, 2, 1)
-        cls.vbox1.pack_start(grid, True, True, 10)
+        left_grid.attach(cls.swap_entry, 0, 5, 2, 1)
+        # Row 6: Separator
+        sep = Gtk.Separator(orientation=Gtk.Orientation.HORIZONTAL)
+        left_grid.attach(sep, 0, 6, 2, 1)
+        # Row 7: Encrypt Disk checkbox
+        left_grid.attach(encrypt_check, 0, 7, 2, 1)
+        # Row 8: Password label + strength indicator
+        left_grid.attach(cls.passwd_label, 0, 8, 1, 1)
+        left_grid.attach(cls.strenght_label, 1, 8, 1, 1)
+        # Row 9: Password input
+        left_grid.attach(cls.password, 0, 9, 2, 1)
+        # Row 10: Confirm label + match icon
+        left_grid.attach(cls.vpasswd_label, 0, 10, 1, 1)
+        left_grid.attach(cls.img, 1, 10, 1, 1)
+        # Row 11: Confirm input
+        left_grid.attach(cls.repassword, 0, 11, 2, 1)
+
+        hbox_main.pack_start(left_grid, False, False, 10)
+
+        # Right panel: tips + disk list
+        right_panel = Gtk.Box(orientation=Gtk.Orientation.VERTICAL, homogeneous=False, spacing=0)
+        cls.mirrorTips.set_alignment(0, 0.5)
+        right_panel.pack_start(cls.mirrorTips, False, False, 0)
+        right_panel.pack_start(sw, True, True, 0)
+
+        hbox_main.pack_start(right_panel, True, True, 10)
+
+        cls.vbox1.pack_start(hbox_main, True, True, 10)
         return
 
     @classmethod
@@ -465,62 +478,21 @@ class ZFS:
         model[path][3] = not model[path][3]
         if model[path][3] is False:
             cls.zfs_disk_list.remove(model[path][0] + "-" + model[path][1])
-            if cls.mirror == "1+ disks Stripe":
-                if len(cls.zfs_disk_list) >= 1:
-                    Button.next_button.set_sensitive(True)
-                else:
-                    Button.next_button.set_sensitive(False)
-            elif cls.mirror == "2+ disks Mirror":
-                if len(cls.zfs_disk_list) >= 2:
-                    Button.next_button.set_sensitive(True)
-                else:
-                    Button.next_button.set_sensitive(False)
-            elif cls.mirror == "3 disks RAIDZ1":
-                if len(cls.zfs_disk_list) == 3:
-                    Button.next_button.set_sensitive(True)
-                else:
-                    Button.next_button.set_sensitive(False)
-            elif cls.mirror == "4 disks RAIDZ2":
-                if len(cls.zfs_disk_list) == 4:
-                    Button.next_button.set_sensitive(True)
-                else:
-                    Button.next_button.set_sensitive(False)
-            elif cls.mirror == "5 disks RAIDZ3":
-                if len(cls.zfs_disk_list) == 5:
-                    Button.next_button.set_sensitive(True)
-                else:
-                    Button.next_button.set_sensitive(False)
         else:
             if cls.check_if_small_disk(model[path][1]) is False:
                 cls.zfs_disk_list.extend([model[path][0] + "-" + model[path][1]])
-                if cls.mirror == "1+ disks Stripe":
-                    if len(cls.zfs_disk_list) >= 1:
-                        Button.next_button.set_sensitive(True)
-                    else:
-                        Button.next_button.set_sensitive(False)
-                elif cls.mirror == "2+ disks Mirror":
-                    if len(cls.zfs_disk_list) >= 2:
-                        Button.next_button.set_sensitive(True)
-                    else:
-                        Button.next_button.set_sensitive(False)
-                elif cls.mirror == "3 disks RAIDZ1":
-                    if len(cls.zfs_disk_list) == 3:
-                        Button.next_button.set_sensitive(True)
-                    else:
-                        Button.next_button.set_sensitive(False)
-                elif cls.mirror == "4 disks RAIDZ2":
-                    if len(cls.zfs_disk_list) == 4:
-                        Button.next_button.set_sensitive(True)
-                    else:
-                        Button.next_button.set_sensitive(False)
-                elif cls.mirror == "5 disks RAIDZ3":
-                    if len(cls.zfs_disk_list) == 5:
-                        Button.next_button.set_sensitive(True)
-                    else:
-                        Button.next_button.set_sensitive(False)
             else:
                 cls.check_cell.set_sensitive(False)
                 cls.small_disk_warning()
+                return True
+
+        # Update swap SpinButton upper limit based on first selected disk
+        if cls.zfs_disk_list:
+            disk_size = int(cls.zfs_disk_list[0].partition('-')[2].rstrip()) - 512
+            cls.swap_entry.get_adjustment().set_upper(disk_size)
+        else:
+            cls.swap_entry.get_adjustment().set_upper(get_ram_size_mb())
+        Button.next_button.set_sensitive(cls._is_ready())
 
         print(cls.zfs_disk_list)
         return True
@@ -589,32 +561,8 @@ class ZFS:
             _widget: Entry widget that triggered the verification (unused)
         """
         if cls.password.get_text() == cls.repassword.get_text():
-            cls.img.set_from_stock(Gtk.STOCK_YES, 5)
+            cls.img.set_from_icon_name("gtk-yes", Gtk.IconSize.MENU)
-            if cls.mirror == "1+ disks Stripe":
+            Button.next_button.set_sensitive(cls._is_ready())
-                if len(cls.zfs_disk_list) >= 1:
-                    Button.next_button.set_sensitive(True)
-                else:
-                    Button.next_button.set_sensitive(False)
-            elif cls.mirror == "2+ disks Mirror":
-                if len(cls.zfs_disk_list) >= 2:
-                    Button.next_button.set_sensitive(True)
-                else:
-                    Button.next_button.set_sensitive(False)
-            elif cls.mirror == "3 disks RAIDZ1":
-                if len(cls.zfs_disk_list) == 3:
-                    Button.next_button.set_sensitive(True)
-                else:
-                    Button.next_button.set_sensitive(False)
-            elif cls.mirror == "4 disks RAIDZ2":
-                if len(cls.zfs_disk_list) == 4:
-                    Button.next_button.set_sensitive(True)
-                else:
-                    Button.next_button.set_sensitive(False)
-            elif cls.mirror == "5 disks RAIDZ3":
-                if len(cls.zfs_disk_list) == 5:
-                    Button.next_button.set_sensitive(True)
-                else:
-                    Button.next_button.set_sensitive(False)
         else:
-            cls.img.set_from_stock(Gtk.STOCK_NO, 5)
+            cls.img.set_from_icon_name("gtk-no", Gtk.IconSize.MENU)
             Button.next_button.set_sensitive(False)

po/tr_TR.po

@@ -13,111 +13,111 @@ msgstr ""
 "Language-Team: Turkish <gnome-turk@gnome.org>\n"
 "Language: tr\n"
 "MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ASCII\n"
+"Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 
 #: install_station/boot_manager.py:121
 #: install_station/interface_controller.py:241
 msgid "Boot Option"
-msgstr ""
+msgstr "Önyükleme Seçeneği"
 
 #: install_station/boot_manager.py:135
 msgid "Setup rEFInd boot manager"
-msgstr ""
+msgstr "rEFInd önyükleme yöneticisini kur"
 
 #: install_station/boot_manager.py:149
 msgid "Setup FreeBSD boot manager"
-msgstr ""
+msgstr "FreeBSD önyükleme yöneticisini kur"
 
 #: install_station/boot_manager.py:164
 #, python-brace-format
 msgid "FreeBSD {loader} loader only"
-msgstr ""
+msgstr "Yalnızca FreeBSD {loader} yükleyicisi"
 
 #: install_station/common.py:123
 msgid "Space not allowed"
-msgstr ""
+msgstr "Boşluk bırakılamaz"
 
 #: install_station/common.py:125 install_station/common.py:127
 msgid "Super Weak"
-msgstr ""
+msgstr "Aşırı Zayıf"
 
 #: install_station/common.py:129 install_station/common.py:135
 msgid "Very Weak"
-msgstr ""
+msgstr "Çok Zayıf"
 
 #: install_station/common.py:131 install_station/common.py:137
 #: install_station/common.py:143
 msgid "Fairly Weak"
-msgstr ""
+msgstr "Oldukça Zayıf"
 
 #: install_station/common.py:133 install_station/common.py:139
 #: install_station/common.py:145 install_station/common.py:151
 msgid "Weak"
-msgstr ""
+msgstr "Zayıf"
 
 #: install_station/common.py:141 install_station/common.py:147
 #: install_station/common.py:153 install_station/common.py:159
 msgid "Strong"
-msgstr ""
+msgstr "Güçlü"
 
 #: install_station/common.py:149 install_station/common.py:155
 #: install_station/common.py:161 install_station/common.py:167
 msgid "Fairly Strong"
-msgstr ""
+msgstr "Oldukça Güçlü"
 
 #: install_station/common.py:157 install_station/common.py:163
 msgid "Very Strong"
-msgstr ""
+msgstr "Çok Güçlü"
 
 #: install_station/common.py:165 install_station/common.py:169
 msgid "Super Strong"
-msgstr ""
+msgstr "Aşırı Güçlü"
 
 #: install_station/custom.py:248
 msgid "Create"
-msgstr ""
+msgstr "Oluştur"
 
 #: install_station/custom.py:252
 msgid "Delete"
-msgstr ""
+msgstr "Sil"
 
 #: install_station/custom.py:256
 msgid "Revert"
-msgstr ""
+msgstr "Geri al"
 
 #: install_station/custom.py:260
 msgid "Auto"
-msgstr ""
+msgstr "Otomatik"
 
 #: install_station/custom.py:328 install_station/custom.py:566
 msgid "Add Partition"
-msgstr ""
+msgstr "Bölüm Ekle"
 
 #: install_station/custom.py:342
 msgid "Type:"
-msgstr ""
+msgstr "Tür:"
 
 #: install_station/custom.py:343 install_station/custom.py:580
 msgid "Size(MB):"
-msgstr ""
+msgstr "Boyut(MB):"
 
 #: install_station/custom.py:344
 msgid "Mount point:"
-msgstr ""
+msgstr "Bağlama noktası:"
 
 #: install_station/custom.py:496
 msgid "Partition Scheme"
-msgstr ""
+msgstr "Bölümlendirme Şeması"
 
 #: install_station/custom.py:515
 msgid "GPT: GUID Partition Table"
-msgstr ""
+msgstr "GPT: GUID Bölümlendirme Tablosu"
 
 #: install_station/custom.py:516
 msgid "MBR: DOS Partition"
-msgstr ""
+msgstr "MBR: DOS Bölümlendirmesi"
 
 #: install_station/end.py:10
 msgid ""
@@ -127,30 +127,35 @@ msgid ""
 "any changes you make or documents you save will\n"
 "not be preserved on reboot."
 msgstr ""
+"Kurulum tamamlandı. Yeni kurulumu kullanmak için\n"
+"bilgisayarı yeniden başlatmanız gerekiyor.\n"
+"Canlı ortamı kullanmaya devam edebilirsiniz; ancak\n"
+"yaptığınız herhangi bir değişiklik veya kaydettiğiniz bir belge\n"
+"yeniden başlatmadan sonra korunmayacaktır."
 
 #: install_station/end.py:31
 msgid "Installation Completed"
-msgstr ""
+msgstr "Kurulum Tamamlandı"
 
 #: install_station/end.py:47
 msgid "Restart"
-msgstr ""
+msgstr "Yeniden Başlat"
 
 #: install_station/end.py:49
 msgid "Continue"
-msgstr ""
+msgstr "Devam Et"
 
 #: install_station/error.py:17
 msgid "Installation Error"
-msgstr ""
+msgstr "Kurulum Hatası"
 
 #: install_station/error.py:28
 msgid "Installation has failed!"
-msgstr ""
+msgstr "Kurulum başarısız oldu!"
 
 #: install_station/error.py:33
 msgid "GhostBSD issue system"
-msgstr ""
+msgstr "GhostBSD Sorun Takip Sistemi"
 
 #: install_station/error.py:35
 #, python-brace-format
@@ -158,14 +163,16 @@ msgid ""
 "Please report the issue to {anchor}, and \n"
 "be sure to provide /tmp/.pc-sysinstall/pc-sysinstall.log."
 msgstr ""
+"Lütfen sorunu {anchor} adresine bildirin ve \n"
+"/tmp/.pc-sysinstall/pc-sysinstall.log dosyasını eklediğinizden emin olun."
 
 #: install_station/error.py:45
 msgid "Ok"
-msgstr ""
+msgstr "Tamam"
 
 #: install_station/install_type.py:94
 msgid "How do you want to install GhostBSD?"
-msgstr ""
+msgstr "GhostBSD'yi nasıl yüklemek istersiniz?"
 
 #: install_station/install_type.py:100
 msgid ""
@@ -173,32 +180,37 @@ msgid ""
 "Install GhostBSD using Stripe, Mirror, RAIDZ1, RAIDZ2, or RAIDZ3 "
 "configurations."
 msgstr ""
+"<b>Disk Yapılandırması</b>\n"
+"GhostBSD'yi Stripe, Mirror, RAIDZ1, RAIDZ2 veya RAIDZ3 yapılandırmalarını "
+"kullanarak kurun."
 
 #: install_station/install_type.py:113
 msgid ""
 "<b>Multi-Boot Configuration</b>\n"
 "Install GhostBSD with ZFS alongside other operating systems."
 msgstr ""
+"<b>Çoklu Önyükleme Yapılandırması</b>\n"
+"GhostBSD'yi ZFS ile birlikte diğer işletim sistemlerinin yanına kurun."
 
 #: install_station/install.py:46
 msgid "Creating ghostbsd_installation.cfg"
-msgstr ""
+msgstr "ghostbsd_installation.cfg Oluşturuluyor"
 
 #: install_station/install.py:50
 msgid "Deleting partition"
-msgstr ""
+msgstr "Bölümlendirme siliniyor"
 
 #: install_station/install.py:55
 msgid "Creating disk partition"
-msgstr ""
+msgstr "Disk bölümlendirmesi oluşturuluyor"
 
 #: install_station/install.py:60
 msgid "Creating new partitions"
-msgstr ""
+msgstr "Yeni bölümlendirmeler oluşturuluyor"
 
 #: install_station/install.py:90
 msgid "Installation in progress"
-msgstr ""
+msgstr "Kuruluyor"
 
 #: install_station/install.py:102
 msgid ""
@@ -211,253 +223,266 @@ msgid ""
 "\n"
 "We hope you'll enjoy our BSD operating system."
 msgstr ""
+"GhostBSD'yi seçtiğiniz için teşekkür ederiz!\n"
+"\n"
+"Her işletim sisteminin basit, zarif, güvenli olması, gizliliğinizi koruması ve "
+"aynı zamanda kullanım kolaylığı sunması gerektiğine inanıyoruz. "
+"GhostBSD, FreeBSD'yi kullanmak için gereken teknik uzmanlığa sahip olmayanlar "
+"için sistemi basitleştiriyor ve BSD'ye giriş eşiğini düşürüyor. \n"
+"\n"
+"İşletim sistemimizi keyifle kullanmanızı umuyoruz."
 
 #: install_station/interface_controller.py:24
 #: install_station/interface_controller.py:35
 msgid "Back"
-msgstr ""
+msgstr "Geri"
 
 #: install_station/interface_controller.py:26
 #: install_station/interface_controller.py:36
 msgid "Cancel"
-msgstr ""
+msgstr "İptal"
 
 #: install_station/interface_controller.py:28
 #: install_station/interface_controller.py:37
 #: install_station/interface_controller.py:297
 msgid "Next"
-msgstr ""
+msgstr "İleri"
 
 #: install_station/interface_controller.py:129
 #: install_station/interface_controller.py:130 install_station/language.py:101
 msgid "Welcome to GhostBSD"
-msgstr ""
+msgstr "GhostBSD'ye Hoş geldiniz"
 
 #: install_station/interface_controller.py:139
 msgid "Button"
-msgstr ""
+msgstr "Buton"
 
 #: install_station/interface_controller.py:160
 msgid "Keyboard Setup"
-msgstr ""
+msgstr "Klavye Yapılandırması"
 
 #: install_station/interface_controller.py:172
 #: install_station/interface_controller.py:274
 #: install_station/interface_controller.py:279
 msgid "Network Setup"
-msgstr ""
+msgstr "Ağ Yapılandırması"
 
 #: install_station/interface_controller.py:183
 msgid "Try Or Install GhostBSD"
-msgstr ""
+msgstr "GhostBSD'yi Deneyin veya Kurun"
 
 #: install_station/interface_controller.py:194
 msgid "Installation Types"
-msgstr ""
+msgstr "Kurulum Türleri"
 
 #: install_station/interface_controller.py:221
 msgid "Custom Configuration"
-msgstr ""
+msgstr "Özel Yapılandırma"
 
 #: install_station/interface_controller.py:231
 msgid "ZFS Configuration"
-msgstr ""
+msgstr "ZFS Yapılandırması"
 
 #: install_station/interface_controller.py:243
 msgid "Install"
-msgstr ""
+msgstr "Kur"
 
 #: install_station/interface_controller.py:253
 msgid "Installation Progress"
-msgstr ""
+msgstr "Kurulum İlerlemesi"
 
 #: install_station/interface_controller.py:260
 msgid "Progress Bar"
-msgstr ""
+msgstr "İlerleme Çubuğu"
 
 #: install_station/keyboard.py:45
 msgid "Type here to test your keyboard"
-msgstr ""
+msgstr "Klavyenizi test etmek için buraya yazın"
 
 #: install_station/keyboard.py:102
 msgid "Keyboard Layout"
-msgstr ""
+msgstr "Klavye Düzeni"
 
 #: install_station/keyboard.py:122
 msgid "Keyboard Models"
-msgstr ""
+msgstr "Klavye Modelleri"
 
 #: install_station/keyboard.py:230
 msgid "English (US)"
-msgstr ""
+msgstr "İngilizce (ABD)"
 
 #: install_station/keyboard.py:231
 msgid "English (Canada)"
-msgstr ""
+msgstr "İngilizce (Kanada)"
 
 #: install_station/keyboard.py:232
 msgid "French (Canada)"
-msgstr ""
+msgstr "Fransızca (Kanada)"
 
 #: install_station/language.py:93 install_station/language.py:197
 msgid "Please select your language:"
-msgstr ""
+msgstr "Lütfen dilinizi seçin:"
 
 #: install_station/language.py:99 install_station/language.py:116
 msgid "Language"
-msgstr ""
+msgstr "Dil"
 
 #: install_station/network_setup.py:107 install_station/network_setup.py:184
 msgid "Network card connected to the internet"
-msgstr ""
+msgstr "İnternete bağlı ağ kartı"
 
 #: install_station/network_setup.py:113 install_station/network_setup.py:190
 msgid "Network card not connected to the internet"
-msgstr ""
+msgstr "İnternete bağlı olmayan ağ kartı"
 
 #: install_station/network_setup.py:116 install_station/network_setup.py:193
 msgid "No network card detected"
-msgstr ""
+msgstr "Ağ kartı bulunamadı"
 
 #: install_station/network_setup.py:125 install_station/network_setup.py:203
 msgid "WiFi card detected and connected to an access point"
-msgstr ""
+msgstr "WiFi kartı algılandı ve bir erişim noktasına bağlı"
 
 #: install_station/network_setup.py:129 install_station/network_setup.py:207
 msgid "WiFi card detected but not connected to an access point"
-msgstr ""
+msgstr "WiFi kartı algılandı ancak bir erişim noktasına bağlı değil"
 
 #: install_station/network_setup.py:132 install_station/network_setup.py:210
 msgid "WiFi card not detected or not supported"
-msgstr ""
+msgstr "Wi-Fi kartı algılanmadı veya desteklenmiyor"
 
 #: install_station/network_setup.py:366
 msgid "Wi-Fi Network Authentication Required"
-msgstr ""
+msgstr "Wi-Fi Ağ Kimlik Doğrulaması Gerekli"
 
 #: install_station/network_setup.py:379
 #, python-brace-format
 msgid "{ssid} Wi-Fi Network Authentication failed"
-msgstr ""
+msgstr "{ssid} Wi-Fi ağı için kimlik doğrulaması başarısız oldu"
 
 #: install_station/network_setup.py:381
 #, python-brace-format
 msgid "Authentication required by {ssid} Wi-Fi Network"
-msgstr ""
+msgstr "{ssid} Wi-Fi ağı için kimlik doğrulaması gerekiyor"
 
 #: install_station/network_setup.py:384
 msgid "Password:"
-msgstr ""
+msgstr "Şifre:"
 
 #: install_station/network_setup.py:387
 msgid "Show password"
-msgstr ""
+msgstr "Şifreyi göster"
 
 #: install_station/try_install.py:102
 msgid "What would you like to do?"
-msgstr ""
+msgstr "Ne yapmak istersiniz?"
 
 #: install_station/try_install.py:109
 msgid ""
 "<b>Install GhostBSD</b>\n"
 "Install GhostBSD on your computer."
 msgstr ""
+"<b>GhostBSD'yi Kur</b>\n"
+"GhostBSD'yi bilgisayarınıza kurun."
 
 #: install_station/try_install.py:122
 msgid ""
 "<b>Try GhostBSD</b>\n"
 "Run GhostBSD without installing to your computer."
 msgstr ""
+"<b>GhostBSD'yi Dene</b>\n"
+"Bilgisayarınızda GhostBSD'yi kurmadan çalıştırın."
 
 #: install_station/use_zfs.py:160
 msgid ""
 "Please select 1 or more drive for stripe (select the smallest disk first)"
 msgstr ""
+"Lütfen stripe için 1 veya daha fazla sürücü seçin (öncelikle en küçük diski seçin)."
 
 #: install_station/use_zfs.py:167
 msgid "Please select 2 drive for mirroring (select the smallest disk first)"
-msgstr ""
+msgstr "Lütfen mirror için 2 sürücü seçin (öncelikle en küçük diski seçin)"
 
 #: install_station/use_zfs.py:175
 msgid "Please select 3 drive for RAIDZ1 (select the smallest disk first)"
-msgstr ""
+msgstr "Lütfen RAIDZ1 için 3 sürücü seçin (öncelikle en küçük diski seçin)"
 
 #: install_station/use_zfs.py:182
 msgid "Please select 4 drive for RAIDZ2 (select the smallest disk first)"
-msgstr ""
+msgstr "Lütfen RAIDZ2 için 4 sürücü seçin (öncelikle en küçük diski seçin)"
 
 #: install_station/use_zfs.py:189
 msgid "Please select 5 drive for RAIDZ3 (select the smallest disk first)"
-msgstr ""
+msgstr "Lütfen RAIDZ3 için 5 sürücü seçin (öncelikle en küçük diski seçin)"
 
 #: install_station/use_zfs.py:292
 msgid "Disk"
-msgstr ""
+msgstr "Disk"
 
 #: install_station/use_zfs.py:299
 msgid "Size(MB)"
-msgstr ""
+msgstr "Boyut(MB)"
 
 #: install_station/use_zfs.py:305
 msgid "Name"
-msgstr ""
+msgstr "İsim"
 
 #: install_station/use_zfs.py:309
 msgid "Check"
-msgstr ""
+msgstr "Kontrol Et"
 
 #: install_station/use_zfs.py:322
 msgid "Please select one drive"
-msgstr ""
+msgstr "Lütfen bir sürücü seçiniz"
 
 #: install_station/use_zfs.py:327
 msgid "<b>Pool Type</b>"
-msgstr ""
+msgstr "<b>Havuz Türü</b>"
 
 #: install_station/use_zfs.py:331
 msgid "1+ disks Stripe"
-msgstr ""
+msgstr "1+ diskli Stripe"
 
 #: install_station/use_zfs.py:332
 msgid "2+ disks Mirror"
-msgstr ""
+msgstr "2+ diskli Mirror"
 
 #: install_station/use_zfs.py:333
 msgid "3 disks RAIDZ1"
-msgstr ""
+msgstr "3 diskli RAIDZ1"
 
 #: install_station/use_zfs.py:334
 msgid "4 disks RAIDZ2"
-msgstr ""
+msgstr "4 diskli RAIDZ2"
 
 #: install_station/use_zfs.py:335
 msgid "5 disks RAIDZ3"
-msgstr ""
+msgstr "5 diskli RAIDZ3"
 
 #: install_station/use_zfs.py:345
 msgid "<b>Pool Name</b>"
-msgstr ""
+msgstr "<b>Havuz Adı</b>"
 
 #: install_station/use_zfs.py:365
 msgid "Encrypt Disk"
-msgstr ""
+msgstr "Diski Şifrele"
 
 #: install_station/use_zfs.py:369
 msgid "Password"
-msgstr ""
+msgstr "Şifre"
 
 #: install_station/use_zfs.py:376
 msgid "Verify it"
-msgstr ""
+msgstr "Doğrula"
 
 #: install_station/use_zfs.py:537
 msgid "Warning"
-msgstr ""
+msgstr "Uyarı"
 
 #: install_station/use_zfs.py:548
 msgid "Smallest disk need to be SELECTED first!\n"
-msgstr ""
+msgstr "Öncelikle en küçük disk SEÇİLMELİDİR!\n"
 
 #: install_station/use_zfs.py:549
 msgid "All the disk selected will reset."
-msgstr ""
+msgstr "Seçilen tüm diskler sıfırlanacaktır."

setup.py

@@ -14,7 +14,7 @@ from DistUtilsExtra.command.build_i18n import build_i18n
 from DistUtilsExtra.command.clean_i18n import clean_i18n
 
 prefix = sys.prefix
-__VERSION__ = '0.1'
+__VERSION__ = '0.4'
 PROGRAM_VERSION = __VERSION__
 
 
@@ -157,7 +157,8 @@ lib_install_station_backend_query = [
 data_files = [
     (f'{prefix}/lib/install-station', ['src/ghostbsd-style.css']),
     (f'{prefix}/lib/install-station/backend-query', lib_install_station_backend_query),
-    (f'{prefix}/lib/install-station/image', lib_install_station_image)
+    (f'{prefix}/lib/install-station/image', lib_install_station_image),
+    (f'{prefix}/etc/rc.d', ['src/install_station'])
 ]
 
 data_files.extend(data_file_list(f'{prefix}/share/locale', 'build/mo'))

src/install_station

@@ -0,0 +1,36 @@
+#!/bin/sh
+#
+# PROVIDE: install_station
+# REQUIRE: LOGIN FILESYSTEMS
+# BEFORE: lightdm
+# KEYWORD: shutdown
+
+. /etc/rc.subr
+
+name="install_station"
+rcvar="${name}_enable"
+start_cmd="${name}_start"
+stop_cmd=":"
+
+install_station_start()
+{
+    # Create .xinitrc for root to run installer
+    cat > /root/.xinitrc <<'EOF'
+exec marco &
+exec feh --bg-fill /usr/local/share/backgrounds/ghostbsd/blue-layered-stripes.jpg &
+exec install-station
+EOF
+    chmod 755 /root/.xinitrc
+
+    # Start X as root - this will block until install-station exits
+    su -l root -c "startx -- :0 vt09"
+
+    # Cleanup
+    rm -f /root/.xinitrc
+
+    # Disable this service for future boots
+    sysrc install_station_enable=NO
+}
+
+load_rc_config $name
+run_rc_command "$1"